Brew this month
Brand

Eagle Brewing parts and accessories

False bottoms, sparge arms, glass carboys, blow-off hoods, FermWrap heaters, cappers and counter-pressure fillers from Eagle Brewing.

See Eagle Brewing on Amazon
Narrow by situation10 products

Eagle Brewing in our catalogue

Products by category

Brewing systems & chillersBrewing systems & chillers: 22Fermenters & temp controlFermenters & temp control: 55Kegging & draftKegging & draft: 11Bottling & cappingBottling & capping: 11Cleaning & sanitizingCleaning & sanitizing: 11

What Eagle Brewing makes in our catalogue

Eagle Brewing makes the small parts that hold a home brewery together. For all-grain, there is the AG405 12 in. stainless false bottom and the BE950 sparge arm. For fermentation: the FE320 5-gallon glass carboy, the FE500 rubber blow-off hood with two ports, the FE650 FermWrap 40 W heater and an FE510 carboy handle for smooth necks.

For packaging, Eagle offers the B490 Emily two-lever capper with a magnet, the KEG801 counter-pressure bottle filler with a three-position valve, a BE510 siphon spray aerator and a bent carboy brush.

Who Eagle Brewing suits

  • Brewers fitting out a cooler mash tun or upgrading a kettle
  • Glass carboy users who need hoods and brushes
  • Kegging brewers who want to bottle from the keg
  • Anyone who needs gentle heat in a cold garage

A carboy handle is not a carrying strap for a full carboy. Carry glass by the base, in a crate or carrier.

Glass carboys breakGlass carboys can break and cut. Use a good carboy handle and always support the bottom when you move a full one; a crate or carrier under the base helps on slippery floors. Never pour hot wort into cold glass. PET and stainless avoid the risk.Source: Craft Beer & Brewing: Homebrew safety

Alternatives from other brands

Brewer's Best's Brew Belt is a heater alternative, the Fermentaholics Emily is a similar two-wing capper, KegLand's Nukatap filler slides into forward-sealing faucets, and Northern Brewer's Titan false bottom is an 11.5 in. option.

Before you buy

Measure first. False bottoms come in fixed diameters (the AG405 is 12 in.), the BE950 sparge arm adjusts about 12–13 in. into the kettle, and the FE320 carboy fits a #7 stopper or carboy hood. The KEG801 filler uses 3/16 in. beer and 5/16 in. gas barbs, so check your line sizes.

Pair the FermWrap with a temperature controller rather than leaving it on full time.

Eagle Brewing products appear in these rankings: best wort aeration and oxygenation kits, best bottle cappers and best beer guns and counter-pressure fillers. For a closer look, read BIAB vs three-vessel brewing.

Eagle Brewing: questions

What does the Eagle FermWrap do?
It is a 40 W flexible heater you tape to a fermenter. Pair it with a temperature controller's heat outlet so it switches on only when needed.
Can I carry a full carboy by an Eagle carboy handle?
Not by the handle alone. Craft Beer & Brewing says to use a good handle and always support the bottom; a crate or carrier under the base is the easy way to do that.
How does the Eagle KEG801 counter-pressure filler work?
It connects to beer and gas lines and uses a three-position valve (off, beer, CO2) to purge and fill bottles under pressure from a keg.
What is an alternative to Eagle Brewing parts?
Northern Brewer, Brewer's Best, KegLand and Fermentaholics make comparable false bottoms, heaters, fillers and cappers.