DERNORD

DERNORD 5500W 240V Tri-Clamp Heating Element with L6-30 Plug

A 5500 W 240V tri-clamp ripple element with a grounded 3-wire L6-30 locking plug. A 240V circuit should be installed by a licensed electrician.

  • 1.5 in. tri-clamp
  • Grounded L6-30 plug
  • 5500 W at 240V

Best for 240V electric kettles

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

TypeElectric heating element
Power240V, 5500 W, L6-30 locking plug
MaterialSUS304, 1.5 in. tri-clamp

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • With 3-Wire Electrical Locking Plug (L6-30) , grounded for your safety
  • Easy to Install and fits Standard 1.5" Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
  • SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power
  • The shape is to minimize length and maximize heated surfaces
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements
Electric brewing: GFCI and a licensed electricianPlug 120V and 240V systems only into a GFCI-protected circuit of the type the manual calls for, with no extension cords. A 1600 W system on 120V draws about 13.3 A (W ÷ V), close to a 15 A circuit’s limit. Have a licensed electrician install any new circuit, 120V or 240V.Source: Anvil Foundry manual (GFCI protection for 240V hookups); W ÷ V arithmetic
Strike water calculatorStrike and infusion water temperatures (Palmer).Dilution and boil-off calculatorPre-boil volume from your boil-off rate.

Full listing title: DERNORD 240V 5500W Tri-clamp Ripple Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)