Brew this month
Inkbird PID Temperature Controller Kit with 40DA SSRInkbird PID Temperature Controller Kit with 40DA SSR, view 2Inkbird PID Temperature Controller Kit with 40DA SSR, view 3Inkbird PID Temperature Controller Kit with 40DA SSR, view 4Inkbird PID Temperature Controller Kit with 40DA SSR, view 5Inkbird PID Temperature Controller Kit with 40DA SSR, view 6
Inkbird

Inkbird PID Temperature Controller Kit with 40DA SSR

A PID controller kit with a 40DA solid state relay, K-type thermocouple and heat sink for building an electric brewing controller; it has one alarm relay output and reads °F or °C.

Brewing systems & chillersGoing all-grain
  • SSR and thermocouple included
  • °F/°C display
  • Alarm relay output

Best for DIY electric brewery controls

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

TypePID controller
Power100–240 VAC
MaterialIncludes 40DA SSR, K-type thermocouple, heat sink

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • Alarm Output: With 1 alarm relay output, AC250 V, 3 A (Resistive load), ON or NC, you can wire a buzzer
  • Supports 3-Wire Sensor: a 3-wire sensor or 2-wire sensor, like the K type thermocouple and Cu500, is supported by this PID temperature controller
  • SSR Output: With 1 relay output for external SSR, an SSR or relay is a must for this temperature controller; A 40DA SSR is included
  • Digital Display Celsius or Fahrenheit: It’s a digital PID controller but also supports Centigrade or Fahrenheit reading
  • 2 Temp Displaying Windows: The real-time temperature and the setpoint are shown at the same time
Electric brewing: GFCI and a licensed electricianPlug 120V and 240V systems only into a GFCI-protected circuit of the type the manual calls for, with no extension cords. A 1600 W system on 120V draws about 13.3 A (W ÷ V), close to a 15 A circuit’s limit. Have a licensed electrician install any new circuit, 120V or 240V.Source: Anvil Foundry manual (GFCI protection for 240V hookups); W ÷ V arithmetic
Strike water calculatorStrike and infusion water temperatures (Palmer).Dilution and boil-off calculatorPre-boil volume from your boil-off rate.

Full listing title: Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV | Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Compare with

All brewing systems & chillers