Kegco

Kegco KT41D-LP Low Profile D System Coupler

A low-profile Sankey D coupler with side gas and beer ports that save about 4 inches of height, a nickel-plated forged brass body and a 55 psi relief valve.

  • Low profile
  • 55 psi relief
  • NSF approved

Best for Commercial kegs in short fridges

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

TypeSankey D coupler
CouplersSankey D, low profile
Gauges55 psi pressure relief

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • Kegco's Low Profile Sankey Coupler significantly reduces the vertical space necessary to tap a keg
  • Both the air input and the beer output come off of the side of the coupler, reducing the necessary space for the beer line by about 4" over standard lever handle couplers
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe
  • Lever handle is easier to use than other twist-type keg couplers
  • Features a 55-psi pressure relief valve to remove excess pressure from the system
CO2 cylinders and pressureKeep cylinders upright and secured, and always use a CO2-rated regulator (US CO2 tanks use the CGA 320 valve fitting); never connect a cylinder straight to a keg. Store tanks cool and away from heat. CO2 displaces oxygen and collects low: ventilate, close the tank valve and leave the room if a tank leaks. Never exceed a fermenter’s or keg’s rated pressure.Source: Kegco: Everything you need to know about CO2; OSHA hazard bulletin on CO2
Keg carbonation chart and PSI calculatorRegulator PSI by beer temperature and CO2 volumes.

Full listing title: Kegco Keg Coupler, D System, Nickel