Brew this month
Taprite T742HP Primary Double Gauge CO2 Regulator
Taprite

Taprite T742HP Primary Double Gauge CO2 Regulator

A primary double-gauge regulator adjustable from 1 to 50 psi with a duck-bill check valve; assembled and tested in the USA.

Kegging & draftSwitching to kegs
  • 1–50 psi output
  • Duck-bill check valve
  • Assembled in USA

Best for Single-pressure kegging

View on Amazon

Opens the product page with today’s price, variants and delivery. We may earn a commission at no extra cost to you. For adults 21+.

Specifications

TypeCO2 regulator
GaugesDouble gauge (output + tank)
PressureAdjustable 1–50 psi

As stated by the maker or seller. Specs can change between versions and sellers; confirm on the listing. We did not test this product.

From the maker

  • Low pressure gauge (the top gauge) indicates output pressure to the keg
  • The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi
  • High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
  • Duck bill check valve helps prevent product back up into the regulator
  • Assembled and Tested in the USA
CO2 cylinders and pressureKeep cylinders upright and secured, and always use a CO2-rated regulator (US CO2 tanks use the CGA 320 valve fitting); never connect a cylinder straight to a keg. Store tanks cool and away from heat. CO2 displaces oxygen and collects low: ventilate, close the tank valve and leave the room if a tank leaks. Never exceed a fermenter’s or keg’s rated pressure.Source: Kegco: Everything you need to know about CO2; OSHA hazard bulletin on CO2
Keg carbonation chart and PSI calculatorRegulator PSI by beer temperature and CO2 volumes.

Full listing title: Taprite T742HP Primary Double Gauge CO2 Regulator, Brass

Compare with

All kegging & draft