Brew this month
Brand

KegLand brewing, fermenting and kegging gear

BrewZilla and DigiBoil electric systems, FermZilla pressure fermenters, RAPT Pill, corny kegs, Nukatap faucets, Duotight fittings and chillers from KegLand.

See KegLand on Amazon
Narrow by situation35 products

KegLand in our catalogue

Products by category

Brewing systems & chillersBrewing systems & chillers: 1212Fermenters & temp controlFermenters & temp control: 1010Kegging & draftKegging & draft: 1212Hydrometers & metersHydrometers & meters: 11

What KegLand makes in our catalogue

KegLand covers almost the whole brewery. On the hot side: the BrewZilla Gen 4 35L 110V all-in-one (one version adds a pump, RAPT Wi-Fi and a stainless immersion chiller), the 65L 220V BrewZilla for 10–12 gal batches, the DigiBoil 35L 110V kettle (1500 W) and DigiMash (18 lb maximum grain bill per the maker). The BrewZilla was formerly sold as Robobrew; listings mix generation names, so check the manual for yours.

For fermentation, the FermZilla All Rounder 30L pressure kit lists 2.5 bar (36.2 psi) and the Tri-Conical 27L Gen3 up to 2.4 bar, with BlowTie spunding valves and a 50L Kegmenter. Kegging gear includes new 5 gal ball lock corny kegs (130 psi operating), Nukatap faucets and counter-pressure filler, Duotight push-in fittings, a mini CO2 regulator and the Cannular can filler. The RAPT Pill is KegLand's floating digital hydrometer, and the Chillout MKIV and Red Reaper are its plate and counterflow chillers.

CO2 cylinders and pressureKeep cylinders upright and secured, and always use a CO2-rated regulator (US CO2 tanks use the CGA 320 valve fitting); never connect a cylinder straight to a keg. Store tanks cool and away from heat. CO2 displaces oxygen and collects low: ventilate, close the tank valve and leave the room if a tank leaks. Never exceed a fermenter’s or keg’s rated pressure.Source: Kegco: Everything you need to know about CO2; OSHA hazard bulletin on CO2

Who KegLand suits

  • Brewers who want a 110V all-in-one with a pump and app control
  • Pressure fermenting and closed-transfer fans
  • Keg builders who like push-in Duotight fittings
  • Brewers who prefer one ecosystem (BrewZilla, FermZilla, RAPT)

Never exceed a FermZilla's rated pressure, and keep the spunding valve or PRV in place.

Alternatives from other brands

The Anvil Foundry and Grainfather G30³ are the main all-in-one alternatives. Tilt is the established Bluetooth hydrometer, and Ss Brewtech's Brew Bucket is a stainless fermenter for brewers who would rather skip PET.

Before you buy

KegLand listings often carry few specs, so download the manual for the exact model and generation. For pressure fermenting, buy a kit that includes the pressure-rated lid and a spunding valve or PRV. Duotight fittings are 8 mm (5/16 in.), so check your line sizes.

KegLand products appear in these rankings: best pressure fermenters, best all-in-one electric brewing systems and best wort chillers. For a closer look, read KegLand BrewZilla Gen 4 review, KegLand FermZilla review, Anvil Foundry vs BrewZilla and Bottling vs kegging homebrew.

KegLand: questions

Is the BrewZilla the same as Robobrew?
The BrewZilla line was formerly sold as Robobrew. Listings mix generation names (Gen 3.1.1, Gen 4), so check the manual for the version you are buying.
What pressure can a FermZilla handle?
KegLand lists 2.5 bar (36.2 psi) for the All Rounder 30L pressure kit and up to 2.4 bar for the Tri-Conical 27L Gen3. Stay below the rating with a spunding valve or PRV.
Does the BrewZilla run on 110V?
The 35L Gen 4 models in our catalogue are 110V. The 65L model is 220V and needs a 240V circuit installed by a licensed electrician.
What is an alternative to KegLand?
Anvil and Grainfather for all-in-ones, Tilt for digital hydrometers, and Ss Brewtech or Spike for stainless fermenters.